Service manual

Removal Procedure SiBE811120
54 Photocatalytic Air Purifier L-Series
4
Disconnect the 2 GND
connectors (green).
5
Remove the 2 screws.
6
Lift up the upper part of
the power supply PCB
and unfasten the hook.
Then remove the power
supply PCB.
[S2]: fan motor
[S8]: power supply
[S11]: joint connector for high
voltage PCB
[S127]: control/display PCB
Step Procedure Points
Press the hook.
(R14730)
Hook
(1)
(2)
(1): ground for plasma ionizer
(2): ground for streamer unit
(R12377)
Hook
(R12378)
[S8] [S2] [S127]
[S11]
(R12379)
Fuse (250 V, 3.15 A)