Service manual

Removal Procedure SiBE811120
56 Photocatalytic Air Purifier L-Series
9.7 Removal of Power Cord
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step Procedure Points
1
Remove the 2 screws
from the front side.
2
Pull the base ASSY out.

Peel off the filament tape
and release the ferrite core
at the backside.
3
Remove the switch
cover.
(R12383)
Base ASSY
(R14656)
Ferrite core
Filament tape
(R12386)
Ferrite core
Switch cover
(R14657)