Specifications
EDUS041129 Dimensions
Split Type Air Conditioners FTXS-L Series 9
4. Dimensions
FTXS30/36LVJU
RKS30/36LVJU, RXS30/36LVJU
47-1/4 (1200mm)
7-3/8 (187mm)
1-3/16 (30mm) MIN
2-9/16 (65mm)
42-11/16 (1085mm)
1-15/16 (50mm) MIN
1-15/16 (50mm) MIN
9/16 (14.5mm)
9-1/2 (242mm)
11/16 (18mm)
9-7/16 (240mm)
45°
2-5/16 (58mm)
8-1/4 (210mm)
47-1/4 (1200mm)
5/8 (16mm)
1-3/8 (35.5mm)
45°
13-3/8 (340mm)
1-3/4 (45mm)
3-1/2 (89mm)
1-3/4 (45mm)
13-3/8 (340mm)
ROOM TEMP. THERMISTOR (INSIDE)
15°
OPERATION LAMP
φ3-1/8 (φ80mm) HOLE
WALL HOLE FOR EMBEDDED PIPING
MAINTENANCE)
(SPACE FOR
SIGNAL RECEIVER
FRONT GRILLE FIXTURES
WIRELESS REMOTE CONTROLLER
THE UNIT : ABOUT 15-3/4 (400mm))
(THE LENGTH OF PIPE OUTSIDE
GAS PIPE φ5/8 (φ15.9mm) CuT
30°
(AUTOMATIC)
UP/DOWN
PLATE
NAME
(AUTOMATIC)
RIGHT/LEFT
BLADE ANGLES
REAR
LOUVERS
INTELLIGENT EYE LAMP
REQUIRED SPACE
75°
THE UNIT : ABOUT 18-1/8 (460mm))
(THE LENGTH OF PIPE OUTSIDE
LIQUID PIPE φ3/8 (φ9.5mm) CuT
RIGHT
PERFORMANCE)
(SPACE FOR
70°
60°
HEATING FAN
BOTTOM
TERMINAL
WITH GROUND
BLOCK
TERMINAL
THE MARK (→) SHOWS PIPING DIRECTION
INDOOR UNIT ON/OFF SWITCH
40°
LEFT
(INSIDE)
SCREWS
FIXED
GRILLE
FRONT
70°
TRANSMITTER
SIGNAL
75°
STANDARD LOCATIONS OF WALL HOLES
AIRFLOW (INDOOR)
(
)
MOUNTING PLATE
INCLUDING
TIMER LAMP
COOLING, DRY
50°
INTELLIGENT EYE SENSOR
25°
MAINTENANCE)
(SPACE FOR
25°
15°
MODEL NAME PLATE
φ3-1/8 (φ80mm) HOLE
WALL HOLE
THE UNIT IS APPROX. 18-5/16 (465mm))
THE HOSE LENGTH OF OUTSIDE
O.D. φ5/8 (φ16mm)
(CONNECTING PART
DRAIN HOSE
C: 3D062739B
MINIMUM SPACE FOR AIR PASSAGE
37
4-CUTS FOR ANCHOR BOLTS
6-5/1624-7/16
(M12)
1/4
3-7/8
3-15/16
13-3/4
3-15/16
11
12-5/8
13-3/4
14-15/16
1-15/161-15/16
6-5/16
(13-9/16~13-15/16)
DRAIN OUTLET
I.D. φ15/16 HOSE FOR CONNECTION.
15/16
1-15/16
3-15/16
1-3/8 7-1/166-1/167-15/16
13-3/4
13/3/4
TERMINAL STRIP
GAS STOP VALVE
BRAND NAME LABEL
NAME PLATE
15/16
OUTDOOR AIR
LIQUID STOP VALVE
THERMISTOR
GROUND TERMINAL
38-15/16
22-1/4
2-3/16
3-15/16
GAS PIPE
3-5/16
3-1/16
(φ5/8 SINGLE UNION)
1-11/16
INTERCONNECTING PIPING
1-15/16
3-1/2
LIQUID PIPE
AND WIRING INLET
(φ3/8 SINGLE UNION)
WALL HEIGHT ON AIR OUTLET SIDE = LESS THAN 47-1/4
3D074190