SiBE81-909 Preliminary Humidifying Air Purifier
SiBE81-909 Air Purifier MCK75JVM-K 1.Introduction ......................................................................................................2 2.Precautions for Use..........................................................................................5 2.1 Required Conditions ............................................................................5 2.2 Applicable Room Area .........................................................................5 3.Functions ..............................
Introduction SiBE81-909 1. Introduction “Clean Humidification”and “High Airflow Rate Purifying”are realized. Both “full humidification”and “full dust collection”can be used. Full Humidification Full Dust Collection 3 features for “Clean Humidification” High airflow rate suction dust collection: 7.5m3/min Antibacterial humidifying filter Silver ion antibacterial effect Unsoaking humidifying rotor High hydrostatic thin-type fan is equipped . Max.
SiBE81-909 Introduction Full humidification New Design: High hydrostatic thin-type powerful fan “Double Path Mixing Structure” Newly designed thin-type fan Vaporized air and non-vaporized air are mixed and discharged by shifting the humidifying filter from the fan. This design prevents drop of the airflow temperature and restrains drop of the room temperature.
Introduction SiBE81-909 [Test Conditions] Full Deodorization [Photocatalyst & Streamer Discharge] technique strongly decomposes and removes odor, formaldehyde and so on.
SiBE81-909 Precautions for Use 2. Precautions for Use 2.1 Required Conditions Power Supply 1φ, 220-240/220-230V, 50/60Hz Miscellaneous •This product is for home use. Do not use for special purpose. •This product is for indoor use only. Do not use in bathroom or outdoors as it is not water/condensation proof. •Do not modify this product. 2.
Precautions for Use SiBE81-909 Category Structure Health & Clean Functions Odor sensor { Dust sensor { Humidity sensor { Temperature sensor { Flash streamer discharge { Catechin pre-filter { Titanium apatite photocatalytic filter { Bio-antibody filter Attached pleated filter (sheets) Monitor Operation Maintenance Convenience Other Functions Remote controller 6 MCK75JVM-K 3.
SiBE81-909 Specifications 4. Specifications 4.1 Specifications MCK75JVM-K Model Air purifying operation Type Humidifying operation Humidifying air purifier Color 1 Black 1φ, 220-240/220-230V, 50/60Hz Power supply Running current (HH/H/M/L/LL) A 0.71 / 0.31 / 0.19 / 0.12 / 0.09 0.72 / 0.32 / 0.19 / 0.13 / 0.
Specifications SiBE81-909 NOTE: 1. Panel color : Silver (General) / Bordeaux, Black Optional accessory (for Russia only). 2. Humidification amount changes in accordance with indoor and outdoor temperature and humidity. Measurement condition : 20°C (temperature), 30% (humidity) (JEM1426) 3. Operating sound levels are the average of values measured at 1m away from the front, left, right, and top of the unit. (This equal to the value in an anechoic chamber.) 4.
SiBE81-909 4.2 Specifications Dimension MCK75JVM-K · Required installation space (If installed on the floor) Air outlet grille Signal Transmitter 100 or more 11 8 90 ON / OFF button 52 500 or more 1000 or more 1000 or more 500 or more Dust sensor · Dimension of remote controller (ARC458A4) Odor sensor Handles Direction of a blow Receiver 590 Streamer pocket Power supply cord (4) 395 (4) 2 Plug type : C- Type Type of Cordage : H05VVH2-F Cross Sectional Area : 0.75mm2 No.
Specifications 4.3 SiBE81-909 Wiring Diagram MCK75JVM-K A1P H37P H36P H30P H31P H24P H44P H29P H35P H28P H34P H27P H33P H26P H32P H25P H43P H42P H41P H40P A5P CN1 H23P ODOR SENSOR S400 H21P H17P S3 H19P BS7 H20P BS8 BS6 BS5 S129 H1P 4 H10 S4 Z2C BS2 S1 S128 INCLINATION SENSOR BS4 HUMIDITY RTH SENSOR 20 H12P H11P H10P H9P A2P H22P Note: 1. S, CN SHOWS A CONNECTOR. 2.
SiBE81-909 4.
Operation Manual SiBE81-909 5. Operation Manual 5.
SiBE81-909 Humidifying Air Purifier Operation Manual 13
Operation Manual 14 SiBE81-909 Humidifying Air Purifier
SiBE81-909 Humidifying Air Purifier Operation Manual 15
Operation Manual 5.
SiBE81-909 Humidifying Air Purifier Operation Manual 17
Operation Manual 18 SiBE81-909 Humidifying Air Purifier
SiBE81-909 Humidifying Air Purifier Operation Manual 19
Operation Manual 20 SiBE81-909 Humidifying Air Purifier
SiBE81-909 Humidifying Air Purifier Operation Manual 21
Operation Manual 5.
SiBE81-909 5.
Operation Manual 5.
SiBE81-909 5.
Operation Manual 5.
SiBE81-909 Humidifying Air Purifier Operation Manual 27
Operation Manual 5.
SiBE81-909 5.
Operation Manual SiBE81-909 5.
SiBE81-909 Humidifying Air Purifier Operation Manual 31
Operation Manual SiBE81-909 5.
SiBE81-909 Humidifying Air Purifier Operation Manual 33
Operation Manual SiBE81-909 5.
SiBE81-909 Humidifying Air Purifier Operation Manual 35
Operation Manual SiBE81-909 5.
SiBE81-909 Humidifying Air Purifier Operation Manual 37
Operation Manual 38 SiBE81-909 Humidifying Air Purifier
SiBE81-909 Humidifying Air Purifier Operation Manual 39
Operation Manual 40 SiBE81-909 Humidifying Air Purifier
SiBE81-909 Humidifying Air Purifier Operation Manual 41
Operation Manual 42 SiBE81-909 Humidifying Air Purifier
SiBE81-909 Humidifying Air Purifier Operation Manual 43
Operation Manual 44 SiBE81-909 Humidifying Air Purifier
SiBE81-909 Humidifying Air Purifier Operation Manual 45
Operation Manual 46 SiBE81-909 Humidifying Air Purifier
SiBE81-909 Operation Manual 3P234570-1 Humidifying Air Purifier 47
Optional Accessories SiBE81-909 6. Optional Accessories 6.1 Dimensions 6.1.1 Pleated Filter KAC998A4E Specifications Model Item Material Quantity KAC998A4E Non-woven fabric (electrostatic) 7 11 26 67 67 305 Notes: 1. Replacement guideline: Every year (for about 7 years in total) 2. Appearance color: White (front), blue (back) 26 pleats ± 1pleat 14 1pleat Extend pleats in using C:3JHB13523 6.1.
SiBE81-909 Optional Accessories 6.1.3 Front Panel (for Russia) BCK75J-BD Specifications Model Color and Quantity FRONT PANEL (OPTION) Bordeaux: 1 Black: 1 Black 502.5 Bordeaux or Black BCK75J-BD (4) 395 (4) 46.
Troubleshooting SiBE81-909 7. Troubleshooting 7.1 Basic Inspection (1) Is the connector for the PCB plugged in? Or is there any poor connection? (2) Is the wire harness broken? It is not malfunction. . Lighting UNIT1 Plasma ionizer UNIT2 Streamer unit Clean as above. Lighting or Flash Replace the humidifying filter or the air-purifying filter (pleated filter). Then, press and hold the RESET button for 2 seconds.
SiBE81-909 Troubleshooting Check lamp Humidifying Air Purifier 51
Troubleshooting SiBE81-909 It may be malfunction.
SiBE81-909 7.
Troubleshooting 54 SiBE81-909 Humidifying Air Purifier
SiBE81-909 Humidifying Air Purifier Troubleshooting 55
Troubleshooting 7.
SiBE81-909 7.4 Troubleshooting Troubleshooting 7.4.1 Equipment does not operate, or operation lamps does not light. Caution 1 Be sure to turn off power switch before connect or disconnect connector, or parts damage may be occurred. Models Covered 5 Troubleshooting Diagnosis MCK75JVM-K Is the power cord plugged in? Or is the breaker "ON"? 2 Remedy No Plug in the power cord. Set the breaker to “ON”.
Troubleshooting SiBE81-909 7.4.2 The water supply lamp blinks. Caution 1 Be sure to turn off power switch before connect or disconnect connector, or parts damage may be occurred. Models Covered MCK75JVM-K 5 Troubleshooting Diagnosis Is the humidifying tray removed? Remedy Yes Set the humidifying tray. Yes Replace the humidifying tray. No 2 Method of Malfunction Detection Remove the front panel and the water tank, and then remove the humidifying tray.
SiBE81-909 Troubleshooting 7.4.3 The odor / dust sensor lamp keeps lighting red. Caution 1 Be sure to turn off power switch before connect or disconnect connector, or parts damage may be occurred. Models Covered MCK75JVM-K 5 Troubleshooting Diagnosis Remedy Check humidity of the installation environment. 2 Method of Malfunction Detection Is the humidity 80% or lower? No Yes Install the unit in another room or corridor.
Troubleshooting SiBE81-909 7.4.4 DC fan locks. Caution 1 Be sure to turn off power switch before connect or disconnect connector, or parts damage may be occurred. Models Covered MCK75JVM-K 5 Troubleshooting Diagnosis Remedy All 4 airflow rate indicators blink simultaneously. 2 Method of Malfunction Detection Abnormality of the fan motor is detected by revolutions with the Hall IC while the fan motor is running. Disconnect the power supply plug once and wait for 3 seconds.
SiBE81-909 Troubleshooting 7.4.5 The odor / dust / humidity sensor lamp does not light. Caution 1 Be sure to turn off power switch before connect or disconnect connector, or parts damage may be occurred. Models Covered MCK75JVM-K 5 Troubleshooting Diagnosis Remedy If the brightness Yes adjustment button is pressed, is the lamp turned on? 2 Method of Malfunction Detection This is not a failure.
Troubleshooting SiBE81-909 7.4.6 Humidity is not increased, or the humidity sensor lamp is not changed. Caution 1 Be sure to turn off power switch before connect or disconnect connector, or parts damage may be occurred. Models Covered 5 Troubleshooting Diagnosis MCK75JVM-K Do the 4 humidity switching lamps simultaneously blink? No Remedy Check humidity in the installation environment. Move the unit to other humidity environment such as another room.
SiBE81-909 Troubleshooting 7.4.7 The power supply PCB or the operation PCB is at fault. Caution 1 Be sure to turn off power switch before connect or disconnect connector, or parts damage may be occurred. Models Covered MCK75JVM-K 5 Troubleshooting Diagnosis Remedy The 3 OFF timer lamps simultaneously blink. Check the connector for connection (S108). 2 Method of Malfunction Detection Abnormality of the zero cross from the power supply is detected.
Troubleshooting 7.5 SiBE81-909 Check 7.5.1 Checking the connection when the PCB is replaced. Check1 Perform the following checking procedure when replacing the PCB. (1) Procedure Pressing [ON/OFF] button and [Humidify ON/OFF] button simultaneously, turn on the power. → The buzzer sounds and all lamps light. After checking the buzzer sound, press [ON/OFF] button once. → The lamps corresponding to the PCB version light. Press [Humidify ON/OFF] button once. Press [Fan setting] button once.
Specifications, designs and other content appearing in this brochure are current as of December 2008 but subject to change without notice.
