Specifications

Specifications SiUS39-602
16 Specifications
Ceiling Mounted Built-in Type
Notes:
★
1 Nominal cooling capacities are based on the following conditions:
Return air temperature: 80°FDB, 67°FWB
Outdoor temperature: 95°FDB
Equivalent ref. piping length: 25ft (Horizontal)
★
2 Nominal heating capacities are based on the following conditions:
Return air temperature: 70°FDB.
Outdoor temperature: 47°FDB, 43°FWB
Equivalent ref. piping length: 25ft (Horizontal)
3 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
★
4 External static pressure is changeable to change over the connectors inside electrical box, this pressure
means
"High static pressure – Standard".
★
5 Anechoic chamber conversion value, measured under JISB8616 conditions. During actual operation,
these values are normally somewhat higher as a result of installation conditions.
Model FXSQ30MVJU FXSQ36MVJU FXSQ48MVJU
★
1 Cooling Capacity Btu/h 30,000 36,000 48,000
★
2 Heating Capacity Btu/h 34,000 40,000 54,000
Casing / Color Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate
Dimensions: (H×W×D) in 11-7/8
× 55-1/8 × 31-1/2 11-7/8 × 55-1/8 × 31-1/2 11-7/8 × 55-1/8 × 31-1/2
Coil (Cross
Fin Coil)
Rows × Stages × FPI 3 × 14 × 14 3 × 14 × 14 3 × 14 × 14
Face Area ft² 3.64 3.64 3.64
Fan
Model 3D18H2A 3D18H2A 3D18H2A
Type Sirocco Fan Sirocco Fan Sirocco Fan
Motor Output HP 0.30 0.30 0.30
Air Flow Rate (H/L) cfm 950/720 990/740 1,300/950
External Static Pressure
★
4 in. Aq 0.57-0.39 0.57-0.35 0.34-0.10
Drive Direct Drive Direct Drive Direct Drive
Temperature Control
Microprocessor Thermostat for
Cooling and Heating
Microprocessor Thermostat for
Cooling and Heating
Microprocessor Thermostat for
Cooling and Heating
Sound Absorbing Thermal Insulation Material Glass Fiber Glass Fiber Glass Fiber
Air Filter Resin Net (with Mold Resistant) Resin Net (with Mold Resistant) Resin Net (with Mold Resistant)
Piping
Connections
Liquid Pipes in
φ
3/8 (Flare Connection)
φ
3/8 (Flare Connection)
φ
3/8 (Flare Connection)
Gas Pipes in
φ
5/8 (Flare Connection)
φ
5/8 (Flare Connection)
φ
5/8 (Flare Connection)
Drain Pipe in
VP25
(External Dia. 1-1/4 Internal Dia. 1)
VP25
(External Dia. 1-1/4 Internal Dia. 1)
VP25
(External Dia. 1-1/4 Internal Dia. 1)
Machine Weight (Mass) Lbs 119 119 122
★
5 Sound Level (H/L) dBA 45/39 45/39 48/43
Safety Devices
Fuse,
Thermal Protector for Fan Motor
Fuse,
Thermal Protector for Fan Motor
Fuse,
Thermal Protector for Fan Motor
Refrigerant Control Electronic Expansion Valve Electronic Expansion Valve Electronic Expansion Valve
Connectable outdoor unit R-410A Series R-410A Series R-410A Series
Decoration
Panel
(Option)
Model BYBS125DJW1 BYBS125DJW1 BYBS125DJW1
Panel Color White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5)
Dimensions: (H×W×D) in 2-1/8
× 59 × 19-5/8 2-1/8 × 59 × 19-5/8 2-1/8 × 59 × 19-5/8
Weight Lbs 14 14 14
Standard Accessories
Operation Manual, Installation
Manual, Paper Pattern for
Installation, Drain Hose, Clamp
Metal, Insulation for Fitting, Sealing
Pads, Clamps, Screws, Washers.
Operation Manual, Installation
Manual, Paper Pattern for
Installation, Drain Hose, Clamp
Metal, Insulation for Fitting, Sealing
Pads, Clamps, Screws, Washers.
Operation Manual, Installation
Manual, Paper Pattern for
Installation, Drain Hose, Clamp
Metal, Insulation for Fitting, Sealing
Pads, Clamps, Screws, Washers.
Drawing No. C:3D042684