Specifications

SiUS39-602 Specifications
Specifications 17
Ceiling Mounted Duct Type
Notes:
★
1 Nominal cooling capacities are based on the following conditions:
Return air temperature: 80°FDB, 67°FWB
Outdoor temperature: 95°FDB
Equivalent ref. piping length: 25ft (Horizontal)
★
2 Nominal heating capacities are based on the following conditions:
Return air temperature: 70°FDB.
Outdoor temperature: 47°FDB, 43°FWB
Equivalent ref. piping length: 25ft (Horizontal)
3 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
★
4 External static pressure is changeable to change over the connectors inside electrical box, this pressure
means
"High static pressure – Standard".
★
5 Air filter is not standard accessory, but please mount it in the duct system of the suction side.
Select its colorimetric method (gravity method) 50% or more.
★
6 Anechoic chamber conversion value, measured under JISB8616 conditions. During actual operation,
these values are normally somewhat higher as a result of installation conditions.
Model FXMQ30MVJU FXMQ36MVJU FXMQ48MVJU
★
1 Cooling Capacity Btu/h 30,000 36,000 48,000
★
2 Heating Capacity Btu/h 34,000 40,000 54,000
Casing / Color Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate
Dimensions: (H×W×D) in 15-3/8
× 28-3/8 × 27-1/8 15-3/8 × 43-3/4 × 27-1/8 15-3/8 × 43-3/4 × 27-1/8
Coil (Cross
Fin Coil)
Rows × Stages × FPI 3×16×13 3×16×13 3×16×13
Face Area ft² 1.95 3.43 3.43
Fan
Model D11/2D3AA1VE 2D11/2D3AG1VE 2D11/2D3AF1VE
Type Sirocco Fan Sirocco Fan Sirocco Fan
Motor Output HP 0.21 0.36 0.58
Air Flow Rate (H/L) cfm 690/565 1,020/810 1,270/1,020
External Static Pressure
★
4 in. Aq 0.66-0.43 0.71-0.43 1.0-0.72
Drive Direct Drive Direct Drive Direct Drive
Temperature Control
Microprocessor Thermostat for
Cooling and Heating
Microprocessor Thermostat for
Cooling and Heating
Microprocessor Thermostat for
Cooling and Heating
Sound Absorbing Thermal Insulation Material Glass Fiber Glass Fiber Glass Fiber
Air Filter
★
5
★
5
★
5
Piping
Connections
Liquid Pipes in
φ
3/8 (Flare Connection)
φ
3/8 (Flare Connection)
φ
3/8 (Flare Connection)
Gas Pipes in
φ
5/8 (Flare Connection)
φ
5/8 (Flare Connection)
φ
5/8 (Flare Connection)
Drain Pipe in
VP25
External Dia. 1-1/4
Internal Dia. 1
VP25
External Dia. 1-1/4
Internal Dia. 1
VP25
External Dia. 1-1/4
Internal Dia. 1
Machine Weight (Mass) Lbs 99 139 144
★
6 Sound Level (H/L) dBA 45/41 45/41 48/45
Safety Devices
Fuse,
Thermal Fuse for Fan Motor
Fuse,
Thermal Fuse for Fan Motor
Fuse,
Thermal Fuse for Fan Motor
Refrigerant Control Electronic Expansion Valve Electronic Expansion Valve Electronic Expansion Valve
Connectable outdoor unit R-410A Series R-410A Series R-410A Series
Standard Accessories
Operation Manual, Installation
Manual, Drain Hose, Clamp Metal,
Insulation for Fitting, Sealing Pads,
Clamps, Screws.
Operation Manual, Installation
Manual, Drain Hose, Clamp Metal,
Insulation for Fitting, Sealing Pads,
Clamps, Screws.
Operation Manual, Installation
Manual, Drain Hose, Clamp Metal,
Insulation for Fitting, Sealing Pads,
Clamps, Screws.
Drawing No. C:3D042685
()()()