Engineering

EDUS181520C Options for Outdoor Unit
Options 473
5
2. Options for Outdoor Unit
2.1 <KKPJ5F180> Drain Plug
Installation

Use this plug to connect a drain hose to dispose the drain from the outdoor unit.
ProjectionsProjections
Installation Procedure
Note: 2
Check that this Kit contains the following parts.
(View from bottom)
Note: 3
Before Installation
Drain cap (2 pieces)2Drain socket (1 piece)1 Seal (1 sheet)4 Drain receiver (3 pieces)
3
Note: 1
• Please refer to the installation manual of outdoor unit.
Be sure not to insert them into wrong drain holes, or
there causes water leakage.
Projection
(4 places)
Projection
(4 places)
Please check whether drain receiver 3 is caught in four
projections of drain socket 1 and drain cap 2 correctly.
It will become the cause of the leak they are not
attached correctly.
3. Connect vinyl hose on the market (internal diameter of
25mm) to drain socket 1 .
(If the house is too long and hangs down, fix it carefully
to prevent the kinks.)
4. Affix seals 4 to part A as shown on the above
drawing.
(It is unnecessary when it is the model which does not
have opening in A.)
5. After join drainsocket 1 and draincap 2
, please
check whether there is not any leak to A and the other
parts by pouring water.
1. If the drain holes of the outdoor unit are covered with
the mounting bracket or the floor, raise the unit to
provide the space of more than 100mm under the leg of
the outdoor unit.
2. Do not use this option in the cold latitudes.
At bottom frame, drained water is frozen up.
1. Insert drain receiver 3 onto drain socket 1 and
drain cap 2 beyond 4 projections around drain
socket and drain cap.
Refer to a right picture (Note: 2)
Drain socket 1 Drain cap 2
Drain receiver 3
2. Insert drain socket and drain caps into their
matching drain hole; Drain socket 1 into drain hole
B and drain caps 2 into drain hole C and D. After
insertion, turn them about 40 clockwise.
3P066795-1B