Operation Manual
Table Of Contents
- Feature
- Contents
- Safety Considerations
- Names of Parts
- Preparation before Operation
- AUTO · DRY · COOL · HEAT ·FAN Operation
- Adjusting the Airflow Directionand Rate
- COMFORT AIRFLOW /INTELLIGENT EYE Operation
- POWERFUL Operation
- OUTDOOR UNIT QUIETOperation
- ECONO Operation
- OFF TIMER Operation
- ON TIMER Operation
- WEEKLY TIMER Operation
- WEEKLY TIMER Operation
- Note for Multi System
- Care and Cleaning
- Troubleshooting
- Quick Reference
31
Care and Cleaning
CAUTION
• When removing or attaching the front panel, stand on a solid, stable base and take care not to fall.
• When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
• After cleaning, make sure that the front panel is securely xed.
1. Remove the front panel.
• Open the front panel.
• Slide the front panel to either the left or right and
pull it toward you.
This will disconnect the front panel shaft on one
side.
Front panel shaft
1) Slide
2) Pull
1) Slide
2) Pull
• Disconnect the front panel shaft on the other side
in the same manner.
2. Clean the front panel.
• Wipe it with a soft damp cloth.
• Only neutral detergent may be used.
• In case of washing the panel with water, wipe it
with a dry soft cloth, and let it dry in the shade after
washing.
3. Attach the front panel.
• Align the front panel shaft on the left and right of
the front panel with the slots, then push them all
the way in.
Front panel
shaft
Slot
• Close the front panel slowly. (Press the panel at
both sides and the central area.)
Front panel
01_EN_3P297290-1C.indd 31 12/8/2015 13:27:41