Operation Manual
Table Of Contents
- Feature
- Contents
- Safety Considerations
- Names of Parts
- Preparation before Operation
- AUTO · DRY · COOL · HEAT ·FAN Operation
- Adjusting the Airflow Directionand Rate
- COMFORT AIRFLOW /INTELLIGENT EYE Operation
- POWERFUL Operation
- OUTDOOR UNIT QUIETOperation
- ECONO Operation
- OFF TIMER Operation
- ON TIMER Operation
- WEEKLY TIMER Operation
- WEEKLY TIMER Operation
- Note for Multi System
- Care and Cleaning
- Troubleshooting
- Quick Reference
5
Names of Parts
Indoor Unit
Air inletFront panel
Air outlet
Louvers (vertical blades)
• The louvers are inside of the air
outlet.
Page 13
Flaps
(horizontal blades)
Page 13
Signal receiver
• It receives signals from the remote
controller.
• When the unit receives a signal, you
will hear a beep sound.
Case Sound type
Operation start beep-beep
Setting changed beep
Operation stop long beep
Display
Indoor unit ON/OFF switch
• Press this switch once to start operation.
Press once again to stop it.
• The operation mode refer to the following table.
Mode Temperature setting Airow rate
AUTO 77°F (25°C) AUTO
• This switch is useful when the remote controller is missing.
Model name
plate
Panel tab
Room temperature
sensor
• It detects the air temperature
around the unit.
INTELLIGENT EYE
sensor
• It detects the movements of
people and automatically
switches between normal
operation and energy saving
operation.
Page 15
OPERATION lamp (green)
TIMER lamp (yellow)
Page 20,21
INTELLIGENT EYE lamp
(green)
Page 15,16
01_EN_3P297290-1C.indd 5 12/8/2015 13:27:27