Service Manual

Trial Operation SiUS071735E
115 Trial Operation and Field Settings
 With Wired Remote Controller (BRC1E73)
1. Set to COOL or HEAT operation using the
remote controller.
2. Press and hold Cancel button for 4 seconds
or longer. Service settings menu is
displayed.
3. Select in the service
settings menu, and press Menu/OK button.
Basic screen returns and “Test Operation”
is displayed at the bottom.
4. Press On/Off button within 10 seconds, and
the test operation starts.
Monitor the operation of the indoor unit for a
minimum of 10 minutes. During test
operation, the indoor unit will continue to
cool/heat regardless of the temperature
setpoint and room temperature.
 In the case of above-mentioned
procedures 3 and 4 in reverse order, test
operation can start as well.
5. Press and hold Cancel button for 4 seconds
or longer in the basic screen.
Service settings menu is displayed.
6. Select in the service
settings menu, and press Menu/OK button.
Basic screen returns and normal operation
is conducted.
 Test operation will stop automatically
after 15 ~ 30 minutes. To stop the
operation, press On/Off button.
Test Operation
Test Operation
Basic screen
1.
2.
3.
4.
5.
Service Settings
menu screen
Press and hold Cancel
button for 4 seconds or
longer during backlight lit.
Press Menu/OK button.
Press On/Off button
(within 10 seconds).
6.
Basic screen
Press and hold Cancel
button for 4 seconds or
longer during backlight lit.
Press Menu/OK button.
Cool
Set to
68F