Specifications

EDUS04-740 Installation Manual

Room Air Conditioners D-Series 41

Indoor Unit Installation

1. Installing the mounting plate.

The mounting plate should be installed on a wall which can support the weight of the indoor unit.

1) Temporarily secure the mounting plate to the wall, make sure that the panel is completely level, and mark

the boring points on the wall.

2) Secure the mounting plate to the wall with screws.

Recommended mounting-plate retention spots and Dimensions

4 15/16

2 3/8

3 1/8

19 13/16 1 3/4

11 7/16

2 1/16

41 5/16

3 15/16

2 1/16 3 9/16

3 15/16

Keep here the piece cut out

from the unit for piping

Through-the-wall

hole φ3 1/8

Drain hose position

3 1/8

Recommended mounting - plate retention

spots (9 spots in all)

(Bolt size : M3/8) (Bolt size : M3/8)

Place a leveler on raised tab.

Use tape

measure

as shown.

Position the

end of tape

measure at

Gas pipe end

Liquid pipe end

* The removed pipe port cover can be

kept in the mounting plate pocket.

Removed pipe

port cover

Mounting plate