Specifications

SiUS12-928 Outdoor Unit – 2MXS18GVJU
Removal Procedure 170
1.4 Removal of the Fan Motor
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
 Disconnect the connector for
the fan motor and release
the fan motor lead wire.
 When reassembling, align
mark of propeller fan with
D-cut section of motor shaft.
 Nut size : M6
Spanner size : 10mm
1
Remove the washer-fitted
nut and remove the
outdoor fan.
2
Remove the 2 screws of
the fan motor mount.
 When reassembling, fix the
fan motor lead wire to avoid
contact with the outdoor fan.
3
Open the 2 clamps and
release the fan motor lead
wire.
Remove the 4 screws to
remove the fan motor.
(R10363)
Fan
motor
mount
(Backside)