Specifications

Outdoor Unit – 2MXS18GVJU SiUS12-928
173 Removal Procedure
1.6 Removal of the Coils and Thermistors
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
1
Remove the screw and
remove the four-way
valve coil.
2
Remove the screw and
remove the defrost
solenoid valve coil.
3
Pull out the electronic
expansion valve coil for
each room.
 Place the thermistor so that its
end comes up to the end of
the fixture.
4
Remove the discharge
pipe thermistor.
 Be careful not to lose the
fixture for the discharge pipe
thermistor.
Four way
valve coil
Defrost
solenoid
valve coil
Electronic
expansion
valve coil
Fixture
Discharge pipe
thermistor
Fixture
(R10536)
Pipe
Thermistor