Specifications

Outdoor Unit – 2MXS18GVJU SiUS12-928
177 Removal Procedure
1.8 Removal of the Compressor
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
1
2
Remove the terminal
cover.
Disconnect the
compressor lead wires.
3
Remove the 2 sheets of
putty.
 Be careful to avoid burning
the compressor terminals or
the nameplate.
4
Remove the 3 nuts with
an open-end spanner.
 Make sure there is no
refrigerant gas left inside the
refrigerant pipes before
starting the job.