Specifications

Main Functions SiUS12-928_A
31 Function and Control
1.3 Airflow Direction Control (Duct-Free System)
Power-Airflow
Dual Louvers
The large louvers send a large volume of air downward to the floor, providing optimum control in
cooling, dry, and heating mode.
Cooling / Dry Mode
During cooling or dry mode, the louver retracts into the indoor unit. Then, cool air can be blown far
and distributed all over the room.
Heating Mode
During heating mode, the large louver directs airflow downward to spread the warm air to the entire
room.
Wide-Angle Fins The fins, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
comfortable air distribution.
Auto-Swing The following table explains the auto-swing process for cooling, dry, fan, and heating:
3-D Airflow Alternative repetition of vertical and horizontal swing motions enables uniform airconditioning of the
entire room. This function is effective for starting the air conditioner.
When the horizontal swing and vertical swing are both set to auto mode, the airflow becomes 3-D
airflow and the horizontal swing and vertical swing motions are alternated. The order of swing
motion is such that it turns counterclockwise, starting from the right upper point as viewed from the
front side of the indoor unit.
Vertical Swing (up and down)
Horizontal Swing
(right and left)
Cooling Dry Fan Heating
10˚
40˚
10˚
40˚
(R2814
5˚
35˚
5˚
35˚
(R281
5˚
55˚
5 ˚
55˚
(R281
15˚
55˚
15˚
55˚
(R2813
50˚
50˚
(R28


(R1024)