User`s manual

17
18
30
Unit: minutes
Time
Cooling
Heating
60
Set temp. before
Off timer begins
to operate
Off timer turns on Off timer stops air conditioner
Heating: the flaps descend to blow
warm air directly down to the floor to
quickly warm the whole room.
Cooling: the flaps flatten out during
operation so that cool air slides off
to reach the farthest corners of the
room.
When you are in the room
When you go out
Intelligent Eye with its infrared sensor
automatically controls air conditioner operation
according to human movement in a room. When
there is no movement, it adjusts the temperature
by ± 2˚C for energy savings of up to 20% for cooling
operation and 30% for heating operation. Intelligent Eye is
available for all wall-mounted models.
Inverter Powerful Operation boosts cooling/heating
performance for a 20-minute period. This is
convenient both when you first turn on your air
conditioner and when you want to quickly change
the temperature during operation.
A uniform temperature is
achieved throughout the
entire room.
Vertical Auto-Swing automatically
moves the flaps up and down and
Horizontal Auto-Swing
automatically moves the louvers
to the left and right. 3-D Airflow combines Vertical and
Horizontal Auto-Swing to circulate air to every part of
a room for uniform cooling/heating of even large spaces.
Power-Airflow Dual Flaps and Wide-Angle
Louvers work in tandem to precisely control
both vertical and horizontal airflow for even
distribution of air.
The unit can be conveniently
started manually in the event
the wireless remote controller
is misplaced or the wireless
remote controller batteries are not
charged.
Cooling operation: Room temperature is raised by 0.5˚C
after 60 minutes, while minimum outdoor unit sound levels
are maintained. If the outdoor temperature is below 27˚C,
room temperature is raised by a further 0.5˚C after 90
minutes except for wall-mounted models.
Heating operation: Room temperature is lowered by 2˚C
after 60 minutes.
Pressing the Off timer button automatically selects
the Night Set Mode. This function prevents any
sudden change in room temperature by gently
raising/lowering the temperature before the air
conditioner stops, so you can sleep more comfortably.
Power-Airflow Dual Flaps
Home Leave Operation prevents large rises or falls
in the indoor temperature by continuing operation*
while you are sleeping or out of your home. This
means that an air-conditioned welcome awaits
when you wake or return. It also means that the indoor
temperature can quickly return to your favourite comfort
setting.
* Home Leave Operation can be selected for any temperature from 18 to
32˚C for cooling operation and 10 to 30˚C for heating operation.
Start Home Leave Operation simply by
pushing its button on the remote controller.
When you are out of your home, your air conditioner prevents large rises
in the indoor temperature by continuing to operate using Home Leave
Operation settings.
When you return, you will be greeted by an
air-conditioned room. Just push the HOME
LEAVE button again to return to your
previous settings.
During cooling operation, 23˚C for the room temperature setting,
and 28˚C for the home leave setting.
23˚C
Wide-Angle Louvers
The louvers can be adjusted
by hand for the
FTK(X)S20/25/35,
FVXS35/50B and
FLXS25/35/50/60B.
The louvers can be adjusted
with the wireless remote
controller for the
FTK(X)S50/60/71F.
28˚C
23˚C
Entirely covers
a spacious room
From a corner
to the centre
Econo Mode
Indoor Unit On/Off Switch
Econo Mode is a function that enables efficient operation
by reducing the maximum operating current and maximum
power consumption of the outdoor unit to the rated
values.* This mode is useful for preventing circuit breakers
from being overloaded by the use of multiple air
conditioners and other electrical devices. The function is
easily activated from the remote controller by pushing the
ECONO button. Econo Mode is available for the
FTK(X)S20/25/35.
* The maximum capacity also decreases to the rated capacity when Econo Mode
is selected.
Normal
Maximum
Rated
Time
Econo Mode
Power
consump.
and current
Refer to page 23 to check the functions offered by individual models.
One push!!
Push again!!
Functions Functions
+1˚C
+0.5˚C
–2˚C
Energy savings plus quick return to favourite comfort setting levels Uniform cooling/heating of the whole living room