Specifications

SiUS34-907
218 Troubleshooting
Master Unit Central Connector Setting Table
The master unit central setting connector (CN1/X1A) is mounted at the factory.
• To independently use a single unit of the intelligent Touch Controller or a single unit of the centralized remote
controller, do not dismount the master unit central setting connector (i.e., use the connector with the factory
setting unchanged).
• To independently use the schedule timer, insert an independent-use setting connector.
No independent-use setting connector has been mounted at the factory. Insert the connector, which is
attached to the casing of the main unit, in the PCB (CN1/X1A).
(Independent-use connector=Master unit central setting connector)
• To use two or more centralized remote controller in combination, make settings according to the table shown
below.
(*1)The intelligent Touch Controller and the schedule timer are not available for combined use.
(*2)The intelligent Touch Controller, centralized remote controller, and the unified ON/OFF controller have been
set to "Provided with the master unit central setting connector" at the factory. The schedule timer has been
set to "Not provided with the master unit central setting connector" at the factory, which is attached to the
casing of the main unit.
CHECK 9
Pattern
centralized remote controller connection pattern Setting of master unit central setting connector(*2)
intelligent
Touch
Controller
Centralized
remote
controller
Unified
ON/OFF
controller
Schedule
timer
intelligent
Touch
Controller
Centralized
remote
controller
Unified
ON/OFF
controller
Schedule
timer
N 1 to 2 units × (*1)
Only a
single unit:
"Provided",
Others: "Not
provided"
O
1 unit 1 unit
× (*1)
Provided
Not
provided
P
1 to 8 units
× (*1)
All "Not
provided"
Q 1 to 2 units × (*1)
Only a
single unit:
"Provided",
Others: "Not
provided"
R
1 to 4 units
Only a
single unit:
"Provided",
Others: "Not
provided"
S
1 to 16 units
1 unit
All "Not
provided
Not
provided
T
U 1 unit
Not
provided
V
1 to 16 units
Only a
single unit:
"Provided",
Others: "Not
provided"
^q 1 unit
Not
provided
^h 1 unit Provided