Users Manual

The Daintree
®
EZ Connect Wireless Integrated Sensor (WIT100)
is a small-size, luminaire-integrated sensor with wireless
communication based on the 802.15.4 standard which provides
secure and reliable communication between the luminaires in
the room. Using the WIT100 sensor in each luminaire provides
state-of-the-art distributed lighting control based on the
built-in motion sensing and daylight harvesting functionalities.
The sensor is shipped in Daintree ONE standalone mode. The
standalone mode works with pre-programmed settings to
maximize energy efciency.
The sensor can be upgraded and personalized with the
Daintree EZ Connect app available as a free download on
the Apple
®
App Store. The sensor can be zoned with up to
30 nearby luminaires using the EZ Connect app. Once
commissioned, the sensed information is then shared
between all luminaires. The system can be commissioned,
with the Daintree EZ connect mobile app. The app is available
for download on Apple
®
devices. The app allows grouping
of xtures and customization of the lighting performance
in the space.
The control of the luminaire is carried out through the digital
bus between the output of the sensor and the control input
of the luminaire’s LED driver. The digital bus also provides the
necessary supply power for the sensor. No additional wiring
or auxiliary power supply are required which helps to minimize
installation costs. When commissioned in a zone it is also
possible to adjust preferred dimming levels manually through
self-powered wireless switches (ZBT-S1AWH).
These ZBT-S1AWH self-powered and wireless dimmer switches
transmit wireless messages to the xtures using the mechanical
energy of button presses to generate all necessary power for
the electronics.
Project Name
Date
Type
Catalog Number
Daintree
™
Wireless Controls
WIT100 Wireless Integrated Sensor
Product Dimensions
Description
Cable from Driver/Interface module
Cable from Driver/Interface module
Sensor Pattern
The detection area
determination was
performed according to the
NEMA WD 7-2011 Standard
(Occupancy Motion Sensors
Standard).
The detector sensitivity was
set to the default 80%
The whole area shows the major motion
detection eld.
The shaded area shows the minor motion
detection eld.
Compatible with
• ZigBee Green Power (included in ZigBee 3.0)
• Daintree EZ Connect controls
• ZBT-S1AWH self powered, wireless dimmer switches