Specifications

The Hot-One System
D-M-E Runnerless Molding Systems
71
Ancillaries - Thermocouples
The Hot-One Manifold
D-M-E Bayonet thermocouples are made of 0,5 mm
stranded glass-insulated wires. The grounded hot
junction is in the end of a 4,78 mm OD stainless steel
protecting tube for fast response and long life. The tube
features a round tip and is fitted with a stainless steel
spring loaded bayonet fitting. Lead wires are protected
by rugged 4,78 mm flexible armor (lead wire calibration
is ANSI Type 'J' Iron/Constantan).
Armor cable is 1 m long, spade lugs are attached at the
end of the lead wires for easy connection to terminal
strip or plug.
Adjustable bayonet type thermocouples fit hole depths
up to 266 mm and will conform to any angle.
Straight type
TC
REF. L
TC 2500 63,5
TC 3500 88,9
TC 6000 152,4
* White wire +
Red wire -
90° Angle type
TC
REF. L
TC 2590 63,5
TC 3590 88,9
TC 6090 152,4
* White wire +
Red wire -
Spade type
TC
REF.
TC 9000
* White wire +
Red wire -
Spade type thermocouples are used
between band heaters and machine
nozzles in applications where space will
not permit bayonet type thermocouples.
The stainless steel spade is only .0,65
mm thick and can be easily contoured
to fit various diameters.
45° Angle type
TC
REF. L
TC 2545 63,5
TC 3545 88,9
TC 6045 152,4
* White wire +
Red wire -
Bayonet adapter
BA
REF. L G
BA 1007 22,2
BA 1013 34,9
1/8-27 NPT
BA 4007 22,2
BA 4013 34,9
3/8-24 UNF
Adjustable type
TC
REF.
TC 8000
* White wire +
Red wire -
The stainless steel
bayonet adapter acco-
modates the spring
loaded bayonet fitting on
the thermocouple to
bottom the hot junction
where temperature
sensing is desired. The
adaptor requires a tapped
hole for fitting
By turning the Adjustable bayonet fitting
along the spring, the Adjustable ther-
mocouple can be set for the desired
immersion length, from 12,5 mm to
266 mm. Spring will conform to any
angle. Hot junction of ANSI type 'J' I/C
calibrated leads is inside round tip.
Flexible metal braid is 1 m long with 63
mm of lead wires at the end and spade
lugs for ease of connection.
Installation
L
A
22,2* 34,9*
63,5 25,4-34,9 12,7-22,2
88,9 50,9-60,3 38,1-47,6
152,4 114,3-123,8 101,6-111,1
266,7 max 12,7-266,7 12,7-266,7
*= Adapter length
Ø 7,1
Ø 4,8
L
A
14
to 266.7mm
*
1000
From 12.7mm
T = 0.65mm
*
1200
25
30
*
90°
12.7
121912.7
102
44.45
L
11
L
G
FeKo
*
45°
12.7
L
44.45
1219
102
*
1219
102
44.45
L
Threaded type
ETC
REF. G
ETC 051 1/4-28 UNF
ETC 0251 M M6
* White wire +
Red wire -
Installed in manifold
between the heat source
and the flow channel to
maintain precise
temperature control.
G
11mm
*
1
12.7
35.6
3
50812
REF.
ETC 0168
TC
Flat washer type
* White wire +
Red wire -
Installed in manifold to maintain
precise temperature control.
Utilized in limited space
applications.
*
Ø 7
5081225.415.7
L