Specifications

44
D-M-E Runnerless Molding Systems
MDS
DEO
MHD
M 12 x 1
L1
M1
6
7
Ø 17
Ø 16
The Hot-One System
Body Support Support Insula- Seal Band TC
blocks blocks ting ring heater Type 'J'
ring
Multiple gate nozzles
Types - MGS
SUB-ASSEMBLY consisting of :
REF.
Sub-
Assembly
Micro Hot-One system
The Multiple gate nozzle developed by D-M-E
increases the potential number of cavities for a mold
by allowing up to six cavities per nozzle. It provides
precise temperature control resulting in an excellent
temperature balance between the individual gates.
MGS
Multiple gate nozzles
The Multiple gate nozzle fits into a small mold base,
cutting equipment cost and reducing the size of the
injection machine required. The nozzle tips are made
of a wear resistant material that provides high thermal
conductivity and long service life.
REF. A B C D
MGS 3802 70 38 20 54/3
MGS 3804 70 38 20 54/3
MGS 6003 90 60 40 72/3
MGS 6006 90 60 40 72/3
How to order
To order a complete Multiple gate nozzle:
1. Select one of the available Sub-Assembly reference
numbers.
2. Select the reference number of the corresponding Point
gate or Thru hole tip of the Screw head type.
3. Both reference numbers as listed under 1. and 2. are
required to get the right delivery.
Remarks: For single application, use the insulating ring
WTO 3000. Radius to be made by customer. For applica-
tions under a manifold, use the seal ring EHR 1150.
Tips for Multiple gate nozzles
MEP
REF. Assembly L
+0,02
M
MEP 0060 MEP 1060 66 59
MEP 0070 MEP 1070 76 69
MEP 0080 MEP 1080 86 79
Screw head nozzle - point gate type
MEO
REF. Assembly L1
+0,02
M1
MEO 0060 65 58
MEO 0070 75 68
MEO 0080 85 78
Screw head nozzle - thru hole type
MEO
MEP
D/3
ECB
WTOECB
TCM
EHR
BHF
60°
60°
Ø 60
90°
Ø 38
10
L1
Ø 16
Ø 36
Ø 25
C
6
A
B
10 *
6
45
L
51
4 tips 6 tips
* min. 6 mm
MDS MHD
DEP
M 12 x 1
7
6
L
Ø 17
M
Ø 16
MGS 3802 ◆
ECB 0501 BHF 3870
MGS 3804 ◆
ECB 0500
WTO 3000 EHR 1150 TCM 0003
MGS 6003 ◆
ECB 0502 BHF 3890
MGS 6006 ◆