Users Manual
Table Of Contents
- Control panel overview
- Wireless connection guide: TV (All systems)
- (All consoles)
- Controller only
- Troubleshooting tips
- Health and safety information
- Bienvenue chez X Rocker !
- Guide de connexion sans fil : télévision (tous les
- Guide de connexion câblée : télévision (toutes le
- Guide de connexion câblée :
- Guide de connexion Bluetooth
- Dépannage
- Informations relatives à la santé et à la sécurité
11
Troubleshooting tips
Issue Troubleshooting steps
No power going to control panel
No sound
Wireless transmitter cuts out during
gameplay/No vibration or subwoofer
sound via analogueconnection
The cables connected to my
X Rocker have been broken
accidentally
Interferenceover wireless connection
• Make sure that the power cableis
connected correctly.
• Make sure that the power supply atthe
power source is working correctly.
• With the chair turned to the ON position,
give the power cable a slight wiggle in the
port. If any lights flicker (or not)
then please contact support (details below).
• Review the connection methods on
the previous page and try alternative
connection methods if possible.
• Confirm that the device/system is
correctly configured as per previous
connection guide.
• Make sure that the wireless channel
switcher is in the corresponding position
that suits your connection method.
(1,2,3 for wireless and AUX for wired
connections).
• Please make sure that the volume of
the source device is at a higher level to
strengthen the audio signal.
• Please contact X Rocker support
(service@acecasual.com) regarding
this issue.
• In this case, try another of the three
wireless bands to isolate the signal.