Manual

4/29/03

Model Trademaster Section I - 6

TRADEMASTER ADJUSTMENTS

A WHEEL CANT ADJUSTMENT– Used to position blade on wheel.

B GUIDE BAR LOCK – Used to lock roll guides into position.

C BLADE TENSION HANDLE – Used to remove and install saw blade. Also used

to set the correct blade tension – be sure blade is tight.

D ROCKER LOCK KNOB – Used to unlock & move table to desired degree angle

of cut then lock into position.

E TABLE LOCK KNOB – Used to lock table into a fixed position.

F VARIABLE SPEED LOCK – Unlock lock and move to the desired blade speed &

relock.

H HYDRAULIC FEED CYLINDER – Used to regulate the table feed.