User Manual

Dako Artisan™ Link | Basic User Guide 59
Section 9 | Cleaning and Maintenance
Artisan™ Link Instrument Cleaning Cycle
The software monitors the number of slides since the last cleaning cycle. You are prompted to run the
cleaning cycle when it is necessary. Use the Artisan Instrument Reagent Cleaning pack (Code
AR314) to clean the instrument.
Start the Cleaning Process
1. Press the OK button in the cleaning cycle alert displayed in the Alerts list.
Note:
You must be using the DakoLink software at a computer connected to
the stainer that needs to be cleaned in order for the OK button to be
displayed.
A dialog box appears with directions for the cleaning process.