DCHT-2500 Wireless Rubber Hose Transmitter Owner’s Manual
Warnings This device complies with Part 15 of the FCC rules, Operation of this device is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference, including interference that may cause undesired operation. Installation: The DCHT-2500 transmitter consists of a transmitter box and 25 feet of hose.To install, connect the hose to the stem on the transmitter box, then lay the hose across the driveway.
Operation: (Always test unit prior to installation) The control box is powered by one 9-volt battery. Coding the transmitter: Note: The transmitters and receivers are preset at the factory. DO NOT change settings, unless changing the tune or experiencing false signals. 1. Open the transmitter box. The first thing you will see is the air switch (Figure 2). Directly below the air switch is the transmitter’s radio (Figure 3). 3+ feet 2. Locate the dip switches on the radio (2)(3). 3.
{ { 1 2 figure 2 4.
Table to select tones: Switch 9 Switch 10 Channel Tune On On 1 Classical Off On 2 Westminster On Off 3 Ding Dong Off Off 4 Whistle Coding the receiver: 1. Open the receiver case by inserting a small screwdriver into one of the pry notches on the side of the case. (refer to receiver manual) 2. Gently lift off the front cover. 3. Locate the eight dip switches on the receiver and make sure they are set identically to dip switches 1-8 on the transmitter.
Troubleshooting the DCHT-2500 If the transmitter is not detecting, try one of these: • Change the battery in the transmitter. • Make sure the transmitter and receiver are coded alike. • Move the transmitter closer to the receiver. • Keep the transmitter away from large metal objects that may interfere with the radio signal. • Adjust the screw on the air switch in the transmitter (Figure 2) (1) by turning it clockwise. This will increase the sensitivity.
TECHNICAL SUPPORT If you encounter any difficulty in the operation of this product after reading the manual, please contact us. You can reach us by phone at 605-356-2772 from 8:30 AM to 5:00 PM Monday through Friday (Central Standard Time). We will be happy to answer your questions and help you in any way we can. Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase.
Dakota Alert, Inc. 32556 E. Main St. P0 Box 130 Elk Point, SD 57025 Phone: (605) 356-2772 Fax: (605) 356-3662 Web: www.dakotaalert.com 8.