user manual

Dakota Alert
DCPB-1000
Made in China
CODE MATCHING & TUNE SELECTION
Entering learning mode
Press and hold the “Learning”
button 3 seconds. The LED #1
will ash. Press the “Learning”
button again to select the zone
you want to code.
Then press the “Melody” button
to select one of 16 melodies.
After selecting the zone and melody, press the remote
button once (the remote button must be within 3 feet of
the chime when programming.) If the coding is successful,
the chime will generate a short tone.
If another LED lights up, this remote
button is already programmed on the
zone that lights up.