User's Guide

M OUNTING THE SENSORS:
Before mounting, choose a suitable location:
• The recommended mounting heigh is about 3 feet. This will help to avoid
false alerts from small animals crossing under the beams.
• The sensor can be mounted up to 300 feet apart.
• Mount the sensor on a solid object such as a wall, post or pipe.
Mounting to a at surface:
1. Use appropriate crews or fasteners to mount the back of the “C” bracket to
a at surface such as a wall or wood post.
2. Make sure both the A and B units are powered on and the rubber plug is
inserted into the power button hole.
3. Use the provided small screws and split ring lock washers to mount the A
and B beams to the “C” brackets.
4. Align the A and B units so that the lenses are pointing towards each other.
5. If the beams are paired, you will get a signal when you walk between the
beams. If you get a signal every 20 seconds (5 minutes optional), this is
the reminder signal and the beams are not aligned. Slightly reposition
the beams until the reminder stops and the beams are activated by
walking between them.