User's Guide
The beams will charge automatically outdoors with the built-in solar panels. If
the beams are used in an interior location with no light, they can be manually
charged.
1. For interior locations, remove the rubber plug from the power button.
2. Locate the USB Micro charging port.
3. Connect a USB Micro charger (not included) to the port.
NOTE: You can either leave the charger connected indeînitely or you can fully
charge the beams periodically. When the beams are fully charged the built-in
batteries will usually hold a charge for about a month, depending on
activations.
RECHARGING THE BEAM S:
Charging Port