Assembly Instructions

7INSTALLATION GUIDE
i36x40 Version 19.9
Align the cam locks from the cam
lock pack over the pre-drilled holes
in the shelves, making sure the
open ends match up. Firmly press
the cam locks into the holes.
7
Lower the shelves with installed cam locks onto the installed cam
dowels on the uprights. Once seated, secure the shelves with a
screwdriver by turning the cam lock a half turn in the clockwise
direction.
8
Tip: The Cam Locks are designed to be turned with the screw driver at a slight
angle as to avoid hitting your knuckles on the vertical panel.
Important: Cam Locks cannot be removed once installed,
ensure proper orientation. Refer to illustrations below.