DAKOTA CLOSET SKU #290-5672, 5673,5674 ASSEMBLE 1
TOOLS NEEDED: -Pencil -Tape Measure -Phillips Head Screwdriver -Stud Finder -Level -Electric Drill Step 1 Start by marking the wood studs in the location your project will be installed. Using the stud finder, pencil and tape measure, find and mark the wall studs. Step 2 Using a screwdriver, install the cam dowels from the cam lock pack into all of the uprights. Use the notes below for location of the cam lock locations counting holes from the bottom.
Step 3 Step 4 Align the cam locks from the cam lock pack over the pre-drilled holes in the shelves, making sure the open ends match up. Firmly press the cam locks into the holes. Cam locks cannot be removed once installed, ensure proper orientation using illustrations below. Seat the cam locks onto the installed cam dowels on the uprights. Once seated, secure the shelves with a screwdriver by turning the cam lock a half turn in the clockwise direction.
Step 5 Step 6 Using the included screws, install the Corner H-Brackets onto the left end of the shelving on the back wall. Install the drawers following the included instructions in the drawer box. Start with the lowest drawer and install drawer, drawer glides, and drawer front before installing next drawer.
Step 7 Step 8 Install the wardrobe rod supports into the pre-drilled holes in the uprights. Insert the wardrobe rod into the wardrobe rod supports. Supports are designed to be adjustable and can be moved to any height desired. Complete your project by securing the closet to the wall with L-Brackets. Install L-Brackets into the top shelf and into the previously marked wall studs. If you are unable to install into the wall stud, use the included drywall anchors.
