DRAWER HARDWARE KIT DRAWER FRONT SOLD SEPARATELY 1 2 1 10x short euro screws 2 ABOVE 4x BELOW 5 5/8" flat screw 5" DRAWER 1 2 3 3 TOP of Drawer Front 1 2 10" DRAWER 3 4 5 6 7 DRAWER SPACING 4x 4 long euro screw
Top Edge of Drawer Top Edge of Drawer Top Edge of Drawer DRAWER TEMPLATE 3” O.C. IMPORTANT: Use the black indicator for proper placement of the template onto your drawer. See illustration below. 5” DRAWER HOLE LOCATION 32mm O.C. 64mm O.C. 96mm O.C. 3” O.C. Knob 10” DRAWER HOLE LOCATION 32mm O.C. 64mm O.C. 96mm O.C. INSTRUCTIONS 1. Tape this template to upper right hand corner of drawer (see illustration for orientation). 2.
