Assembly Instructions

CLOSET DOOR HARDWARE PACK
STEP 1: NEST HINGE INTO PRE-
DRILLED HINGE CUP HOLE ON BACK
OF DOOR
STEP 2: USING A PHILLIPS HEAD SCREW
DRIVER, FASTEN HINGE TO DOOR
STEP 3: INSTALL DOOR WITH INSTALLED HINGES TO UPRIGHTS AT DESIRED
HEIGHT. ATTACH DOOR TO UPRIGHT VIA HINGE BY USING A PHILLIPS HEAD
SCREWDRIVER TO AFFIX PRE MOUNTED EURO SCREWS ON BASEPLATE TO
PRE DRILLED HOLES IN UPRIGHT. SHOWN BELOW.
B
C
A
A
B
C
SIDE VIEW
FRONT VIEW
SKU:211-0616
IN / OUT
UP /
DOWN
LEFT / RIGHT