User Manual

Manual # 650473

VHX-62T-FJ

Dakota Digital VHX Instrument Installation

For 1962-’84 Toyota Land Cruiser

Your new VHX-62T-FJ kit includes:

Installation

Installation Manuals

Control Box

36” CAT5 Cable

Universal Sender Pack

VHX Display

1. First, remove the stock gauge cluster. There are two (2) screws on the front that need to be removed.

Retain the factory screws for reassembly. Also, disconnect the wiring harness and speedometer cable

to completely remove the gauge cluster.

Tang Speed Adapter

Pulse Generator

Cable extension

PAGE 1
VHX-62T-FJ Dakota Digital VHX Instrument Installation For 1962-’84 Toyota Land Cruiser Your new VHX-62T-FJ kit includes: Pulse Generator VHX Display Universal Sender Pack Installation Manuals Cable extension Tang Speed Adapter 36” CAT5 Cable Control Box Installation 1. First, remove the stock gauge cluster. There are two (2) screws on the front that need to be removed. Retain the factory screws for reassembly.
PAGE 2
. The stock bezel will be reused; un-crimp the seven (7) tabs that clamp over the stock gauge housing. The rubber seal should remain inside the stock bezel. 3. Place the VHX system over the back of the bezel and crimp the seven (7) tabs back over the clear lens. Then, attach the provided 36” CAT5 cable to the back of the VHX system. Carefully route the other end to the control box mounting location. 4.