Assembly Instruction

Installation

Step 1

Unpack all parts from cartons carefully.

Step 2 Wire connection

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

Clear,Brown,Gold or Black without Tracer(colored stripes)

Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor

Insulated Wire(not green)with Silver metal conductor

Black

White

*Parallel Cord(round&smooth)

*Parallel Cord(square&ridged)

CAUTION:Cut the “H” plastic buckles with scissor when

take down the PE bags as Fig.1

The adjustment or shortening of the lighting fixtures

suspension length is only needed if the factory set cord

length is not appropriate for your installation.Adjust the

power cord length by loose the Allen Screw(D2) of the

Collar(D1) with the Allen wench (D3), tighten the Allen

Screw(D2) if the cord length is desired.

Connect,Hot,Black or Red outlet Supply Wire to:

Connect,Neutral,White Outlet Supply Wire to:

PIECE DESCRIPTION PICTURE QUANTITY

B E

PIECE DESCRIPTION PICTURE QUANTITY

Mounting Screw

Socket Ring

Bulb

Wire Nut

Canopy

Canopy Nut

Socket

Mounting Plate

Collar

Allen Screw

Allen Wrench

Capiz Shade

2/3