Owner's manual

Dakota Ultrasonics
106
MENU key once to activate the menu items tab. Press the MENU key
multiple times to tab right and the ESC key multiple times to tab left until the
CAL menu is highlighted and displaying the submenu items. Alternatively,
press the LEFT and RIGHT arrow keys multiple times using the left
button wheel.
3) Use the UP and DOWN arrow keys multiple times using the left button
wheel to scroll through the sub menu items until COATING 1PT is
highlighted.
4) Press the ENTER key to display the Digits Edit Box.
5) Press the UP and DOWN arrow keys multiple times using the left button
wheel to scroll the highlighted value.
6) Press the LEFT and RIGHT arrow keys multiple times using the left
button wheel to scroll the digit locations.
7) Repeat steps 5 & 6 until the known thickness value is correctly displayed.
8) Press the OK key to calculate the velocity and return to the menu screen, or
ESC to cancel the coating one point calibration.
9) Finally, press the MEAS key to return to the measurement screen and begin
taking readings.