Instruction Manual

Dakota Ultrasonics

6) Press the OK key to save the NUM BOLTS and return to the Group

List Items menu, or ESC to cancel entering the NUM BOLTS.

Selecting the Number of Readings Per Bolt

Note: A bolt can have up to 51 possible measurements and 1 unloaded

reference length (L-REF). There must be at least one reading per bolt.

Since the group is being created to store probe Zero Data and verify

linearity on a periodic basis prior to measuring or starting a new application,

consider selecting all 51 readings. By selecting all 51 readings, all probe

zero verification can be saved and reported “Cover your backside”.

1) Use the UP and DOWN arrow keys to scroll through the new Group

List Items until NUM READS is highlighted.

2) Press the ENTER key to display the Digits Edit Box.

3) Press the UP and DOWN arrow keys to scroll the highlighted value.

4) Press the LEFT and RIGHT arrow keys to scroll the digit locations.

5) Repeat steps 3 & 4 until the NUM READS value is correctly displayed.