Operation Manual

4 Button Digital Watch
SETTING NORMAL TIME
• In normal time mode, Hold L2 for 2 seconds to alarm time set
mode, then L2 again to normal time set mode, the second digits
begin flashing.
• Press R2 to reset the seconds to “00”, press R1 to switch to the
minute digits.
• Press R2 to advance the minutes. Press R1 to switch to the hour
digits.
• Press R2 to advance the hour. Press R1 to switch to the date.
• Once the date is set, press L2 to return to Normal Time Mode.
STOPWATCH MODE
• In normal time mode, press L2 to display the
stopwatch mode.
• Press R1 to start, then press R1 again to stop.
• Press R2 to return to zero.
DAILY ALARM MODE
• In normal time mode, press R2 to display alarm time.
• Hold R2 and press R1 to select alarm symbol “ “ (alarm will
sound everyday at pre-set time) and chime symbol “ “ (chime
will sound every hour on the hour) alternatively on or off.
SETTING THE ALARM
• In normal time mode, press and hold L2 first to
stopwatch mode and hold 2 seconds to alarm time set
mode; the hour digit begins flashing .
• Press R2 to advance the hour.
• Press R1 to switch to the minute digit and advance
with R2.
• Press L2 to return to the normal time mode when
alarm is set to the desired time.
BUTTON LAYOUT
•This watch is a generic representation of a 4-Button
Digital watch. Some models may or may not include Light
Button M1.
M1
L1
L2
R1
R2
M1
ILLUMINATING THE DISPLAY
• In normal time mode, press and hold the R1 or M1
button (when available) to turn on the dial light.
DISPLAYING THE DATE
• While in the Normal Time Mode, press R1 to display the
Month/Date display.
• Hold R1 and R2 to alternate the Month/Date and
Date/Month (when available).
12/24 HOURS FORMAT
• In normal time mode, press R2 to display alarm time.
• Hold R2 and press L2 to select 12 or 24 hour format.
• The “PM” or “AM” symbol on the displat means both
normal time and alarm time are in 12 hour format.
Otherwise, they are in 24 hour format.