Installation Instructions

FINISH OPTIONS FOR TRIM ENDS:
You may have an area where a piece of moulding may end without being covered completely, there are a few options to quickly
and cleanly nish o these areas:
1. Cut the exposed end of the moulding at a 45° angle returning to the wall. Cut another small piece of moulding with the
opposite 45° angle to and cut to t into gap. This will give your trim a 90° nish into the wall. Glue in moulding piece and
nail if needed after pre-drilling.
2. Ends can be cut straight and a color matching edge banding can be applied to the end of the moulding. Edge banding is
available in multiple colors located in the Hardware Department or online at www.menards.com.
BOURBONCOTTAGE COUNTRY OAK JAVAWHEAT OAK
MO ULDING
Installation instructions
AVAILABLE FINISHES:
CROWN: 3/4" X 3-1/2" RANCH BASE: 7/16" X 2-1/4" RANCH CASING: 1/2" X 2-1/4"
OUTSIDE CORNER: 3/4" X 3/4"
RANCH CASING SETS:
INTERIOR CORNER: 3/4" X 3/4" QUARTER ROUND: 3/4" X 3/4" STOP: 3/8" X 1-1/4" X 8'
AVAILABLE PROFILES:
AVAILABLE DIMENSIONS
24" x 80"
28" x 80"
30" x 80"
32" x 80"
36" x 80"