Instructions / Assembly

ASSEMBLY INSTRUCTIONS:

Item No: 10056/604

1. Place the base (A) on a level surface.

2. Insert the harp (C) until it sits firmly into the saddle (B).

3. Adjust the knurl nut (D) on harp (C).

This can be used to raise the shade a little if necessary.

4. Place lower cap (E), shade (F), and upper cap (G) over

the end of the harp (C) and tighten the finial (H) securing

the shade in place.

5. Insert the bulb into the bulb socket.

Recommended (1) maximum 60 WATT Type “B” Bulb

Or (1) maximum 13WATT CFL Bulb

(Bulb not included)

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth.

Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision -10/16/12

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

PAGE 1
ASSEMBLY INSTRUCTIONS: Item No: 10056/604 FOR RETURN SHIPPING PURPOSES: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. 1. Place the base (A) on a level surface. 2. Insert the harp (C) until it sits firmly into the saddle (B). 3. Adjust the knurl nut (D) on harp (C). This can be used to raise the shade a little if necessary. 4. Place lower cap (E), shade (F), and upper cap (G) over the end of the harp (C) and tighten the finial (H) securing the shade in place. 5. Insert the bulb into the bulb socket.
PAGE 2
INSTRUCIONES DE ASAMBLEA: Modelo: 10056/604 PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO. 1. Ponga la base (A) en una superficie llana. 2. Inserte la arpa (C) hasta que se siente firmemente en la silla de montar (B). 3. Ajuste la tuerca redonda (D) en la arpa (C). Esto se puede utilizar para levantar la pantalla un poco en caso que sea necesario. 4.