Instructions / Assembly

ASSEMBLY INSTRUCTIONS:

Item No: 7560/965

1. Carefully unpack and lay out the parts as shown in illustration.

2. Place the base (A) onto a smooth surface.

Screw the threaded rod (B) into the base (A),

3. Adjust the knurl nut on threaded rod.

This can be used to raise the shade a little if necessary.

4. Place the shade (D) over threaded rod (B).

5. Place the cap (E) over the shade (D) and then tighten with

the finial (F) securing the shade in place.

Recommended (2) maximum 60WATT Type “A” Bulbs

or (2) maximum 13Watt CFL bulbs. (Bulbs not included).

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision - 04/23/13

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

PAGE 1
ASSEMBLY INSTRUCTIONS: Item No: 7560/965 FOR RETURN SHIPPING PURPOSES: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. 1. Carefully unpack and lay out the parts as shown in illustration. 2. Place the base (A) onto a smooth surface. Screw the threaded rod (B) into the base (A), 3. Adjust the knurl nut on threaded rod. This can be used to raise the shade a little if necessary. 4. Place the shade (D) over threaded rod (B). 5.
PAGE 2
INSTRUCIONES DE ASAMBLEA: Modelo: 7560/965 PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO. 1. Cuidadosamente desembale y diseñar las piezas como se muestra en la ilustración. 2. Coloque la base (A) sobre una superficie lisa. Atornille la varilla roscada (B) en la base (A), 3. Ajuste la tuerca moleteado en la varilla roscada. Esto se puede utilizar para subir la persiana un poco si es necesario. 4. Coloque la pantalla (D) sobre la varilla roscada (B). 5.