Instructions / Assembly

ASSEMBLY INSTRUCTIONS:

Item No: 8920/739

1. Place the lamp base on a level surface.

2. Screw the threaded rod (B) into socket assembly (A).

3. Adjust the knurl nut (C) onto the threaded rod (B).

This can be used to raise the shade a little if

necessary.

4. Place shade (D) over threaded rod (B), and tighten

finial (E) securing the shade in place.

5. Insert bulbs into the bulb socket.

Recommended (2) maximum 60 WATT Type “B” Bulbs

Or (2) maximum 13WATT CFL Bulbs

(Bulbs not included)

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth.

Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision – 4/20/12

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

PAGE 1
ASSEMBLY INSTRUCTIONS: Item No: 8920/739 FOR RETURN SHIPPING PURPOSES: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. 1. Place the lamp base on a level surface. 2. Screw the threaded rod (B) into socket assembly (A). 3. Adjust the knurl nut (C) onto the threaded rod (B). This can be used to raise the shade a little if necessary. 4. Place shade (D) over threaded rod (B), and tighten finial (E) securing the shade in place. 5. Insert bulbs into the bulb socket.
PAGE 2
INSTRUCIONES DE ASAMBLEA: Modelo: 8920/739 PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO. 1. Ponga la base en una superficie plana. 2. Atornille la tuerca roscada (B) en la asamblea de la portalámpara (A). 3. Atornille la tuerca rodonda (C) en la tuerca roscada (B). Esto se puede utilizar para levantar la pantalla un poco si es necesario. 4. Coloque la pantalla (D) sobre la tuerca roscada (B) y atornille finial (E) asegurando la pantalla en su lugar. 5.