Instructions / Assembly

ASSEMBLY INSTRUCTIONS:
Item No: FTT10004
1. Place the lamp on a level surface.
Screw socket assembly into the base.
Pull balance of cord from base to tighten excess.
2. Insert the harp until it sits firmly into the saddle.
3. Adjust the knurl nut on harp. This can be
used to raise the shade a little if necessary.
4. Place the shade over the end of the harp and tighten
with the finial securing the shade in place.
5. Insert 60Watt bulb into bulb socket.
Uses (1) Maximum 60WATT Type “A” Bulb.
(Bulb not included).
Cleaning of your lamp
Unplug lamp, wipe with damp cloth.
Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 03/21/11
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.