Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Item No: TT100587

1. Place the base (A) on a level surface,

2. Screw threaded rod (E) into socket assembly (C)

(using finger pressure only) until it sits firmly in cluster.

3. Adjust the knurl nut (F) on threaded rod (E)

This can be used to raise the shade a little if necessary.

4. Place the shade (G) over the end of the threaded rod

and tighten with the finial (H) securing the shade in place.

5. Insert 40W Bulbs (B) into bulb sockets (D).

Uses (2) maximum 40WATT, Type “B” Bulbs or

(2) maximum 13WATT CFL Bulbs (Bulbs not included)

Cleaning of your lamp

Unplug lamp, wipe with damp cloth.

Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision – 12/08/14

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

PAGE 1
ASSEMBLY INSTRUCTIONS Item No: TT100587 FOR RETURN SHIPPING PURPOSES: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. 1. Place the base (A) on a level surface, 2. Screw threaded rod (E) into socket assembly (C) (using finger pressure only) until it sits firmly in cluster. 3. Adjust the knurl nut (F) on threaded rod (E) This can be used to raise the shade a little if necessary. 4. Place the shade (G) over the end of the threaded rod and tighten with the finial (H) securing the shade in place.
PAGE 2
INSTRUCIONES DE ASAMBLEA: Modelo: TT100587 PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO. 1. Coloque la base (A) sobre una superficie plana,. 2. Atornille la varilla roscada (E) en la asamblea de bombilla (C) (con presión de los dedos solamente) hasta que quede firmemente en clúster. 3. Atornille moleteado tuerca (F) en la varilla roscada (E) . Esto se puede utilizar para subir la pantalla un poco si es necesario. 4.