Owner's Manual

Table Of Contents

UK DE DK CN JP FR

6.0 CLEANING & MAINTENANCE

Clean the cabinets with a soft, dry cloth. If the cabinets are dirty, wipe with a soft cloth dipped in

all-purpose cleaner and then well wrung out. Be very careful when wiping the speaker cones,

as they are very fragile. Grille fronts can be cleaned with a clothes brush and wiped with a well

wrung, lint-free cloth and mild all-purpose cleaner.

6.1 AVOID DIRECT SUNLIGHT:

The surfaces of the speakers may fade or become discoloured over time when exposed to

direct sunlight. Therefore avoid positioning the speakers in direct sunlight.

7.0 DISPOSAL

If you want to dispose of this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation that

requires proper treatment, recovery and recycling. Private households in the EU member states,

Switzerland, Liechtenstein and Norway may return their used electronic products free of charge

to designated collection facilities or to a retailer (if you purchase a similar new one). If you reside

in countries not mentioned above, please contact your local authorities for the correct method

of disposal. By following this process, you will ensure that your disposed product undergoes the

necessary treatment, recovery and recycling and thus prevent potential negative effects on the

environment and human health.

8.0 POWER AND ACOUSTIC PRESSURE

How loud a speaker is able to play and still sound good is completely dependent on the signal

it has to reproduce. So, in practice, it is not possible to deﬁne an unequivocal level for use in

comparing different speakers.

Lots of pure, undistorted output from a large ampliﬁer is better than a distorted signal from a

small ampliﬁer stretched beyond its capacity. The signal from a distorting (clipping) ampliﬁer

contains much more high-frequency information than an undistorted signal, and therefore puts

a heavy strain on the tweeter. Consequently, speakers are often damaged by small ampliﬁers,

having to work too hard - and very rarely by large ampliﬁers, which are practically running idle.

It is worth noting that turning tone controls above the neutral setting signiﬁcantly burdens

both speakers and ampliﬁer. On a good sound system tone controls should only be used to

compensate for poor recordings and not to permanently compensate for weaknesses elsewhere

in the system.

Therefore DALI recommends that the tone controls generally be set to the neutral position, and

you achieve your desired sound image through correct positioning of the speakers. Ensuring

that you keep the volume low enough for the sound to remain clear and undistorted will

minimize the strain on both speakers and ampliﬁer.

All DALI loudspeakers are designed with linear impedance for an optimal ampliﬁer load. The

result is a signiﬁcantly more open and detailed sonic image.