congratulations on your discerning taste in selecting DAL loudspeakers Many hours of development work and over fen years of experience are represented in vouch new speakers. In order to ‘achieve maximum performance, we recommend that you read this manual carefully before installing our new speakers. he packaging have been designed to protect the speakers from damage during transport.
IMPORTANT! T urn off the amplifier before connecting the loudspeakers: he speakers dre connected ds shown below, For true stereo reproduction the speakers must be phased correctly: Always connect thé amplifier 4 to the loudspeaker lump crisis Eel ons FEE Jl +, and the amplifier to the loudspeaker Saliva use cables destined specially for tse with loudspeakers, They aren't workaday for correct connection: Ideally, connecting cables should be as short as possible and made of heavy diy cable the latter being pa
T Ris simply mends that the low frequency drivers and the mid/ high frequency drivers Rave separate input terminable connection cable: When vamping, the:low and high frequency divers assn-have two separate amplifiers connected Depending on the equipment used, bi-wiring /bi Griping Can produce significant sonic improvements, because total resistance fs lower and winter reactance ds better isolated from the tweeter When bi-aping 61 bi wiring always remove the link bars.
P lacing the speakers close tithe rear wall increases the bass output, but reduces the depth of the stereo image: lacing the Speaker sin corners Increases tie bass output further, but also makes if preciseness. At this same time, the rendering of perspective in all three dimensions will be drastically reduced and sound will more easily be perceived as coming from the speaker.