Operation Manual

4
5
Positioning
RS3
AS2
CS4
Positioning EUPHONIA RS3
The Euphonia RS3 is suspended on the rear or side wall
using the enclosed  ttings, which allow horizontal
and vertical angling of the RS3. It is important to
angle the tweeter module towards the listening
position to ensure the widest possible frequency
range.
Positioning EUPHONIA AS2
Adjustment options make it possible to integrate the AS2 even when it is
located somewhere other than centrally between the two front speakers. The
best location, however, will always be with the AS2 positioned together with
(under) the CS4 central speaker, if this is possible.
Positioning EUPHONIA CS4
Set up the CS4 on the dedicated base and tilt the speaker front towards the
listening position due to the vertically directional treble sound. Wave-lenghts
are very short in the highest frequency range, and a slightly mis-adjusted angle
can reduce the experience of genuine airiness in the reproduction. Maintain a
minimum distance of 10 cm/4 inch to the back wall so that the bass re ex ports
on the rear of the unit function optimally.