Operation Manual

Connecting

EUPHONIA

AS2

Stereo signal

with full

frequency

content

Connecting the AS2 subwoofer

Thanks to its active crossover network and numerous connection options, the

AS2 provides further advantages such as stepless variable phase. The AS2 is con-

nected to a line signal either via 'Left/Right Input', 'Mono Input' or 'LFE Input'. It

is important that the level of the connected line signal is controlled together with

the equipment’s volume control.

Connection to stereo signal with full frequency content

If the subwoofer is connected to a pre-ampli er without a built-in crossover net-

work of the same high quality as the AS2, we recommend that the subwoofer’s

'Left/Right Inputs' are connected to a signal with full frequency content from a

normal pre-ampli er output. The subwoofer’s built-in crossover network takes

care of the necessary  ltering.

Once the subwoofer’s 'Left/Right Inputs'

are connected to a stereo signal with full

frequency content, there is access to a high-

pass  ltered signal (without the deep tones)

on the 'Left/Right Output' sockets. This

signal is connected to the power ampli er

for the main speakers, which thus does not

need to handle the demanding deep tones.

This will always result in the main speakers

playing more cleanly and un-stressed.