Technical data

ManualsBrandsDali ManualsComputer equipmentH-50

www.tridonic.com

Subject to change without notice.

Data sheet 08/13-LC007-8

LED control gear

Compact dimming

Product description

•1-channel LED control gear

•Independent LED control gear for indoor use

•Output current and output voltage adjustable

•FAN output 12 V

•NTC input channel

•Nominal life of 50,000 h (at ta max. with a failure rate of 5 %)

•Dimmable via DALI, 1 ... 10 V, potentiometer or PUSH function

•Overload protection

•Thermal protection

•Short-circuit protection

•No-load protection

•Type of protection IP20

Technical data

Rated supply voltage 220 – 240 V

Rated current (at 230 V / 50 Hz / full load) 0.25 A

Input voltage range, AC 216 – 264 V

Mains frequency 50 / 60 Hz

Typ. eciency (at 230 V / 50 Hz / full load) 91 %

λ (at 230 V / 50 Hz) 0.95

THD < 10 %

Inrush current 20 A / 400 µs

Control input DALI, 1 ... 10 V, potentiometer

100 kΩ and PUSH function

Stand-by power (at 230 V / 50 Hz) < 2 W

Max. output voltage

90 V

Dimming range 1 – 100 %

PWM frequency 230 – 250 Hz

Set up time at 230 V 500 ms

Switch-o time (at full load) 100 ms

FAN output, voltage 12 V

FAN output, current

50 mA

Max. casing temperature tc 85 °C

Max. casing temperature tc (at lifetime 50,000 h) 75 °C

Dimensions LxWxH 124.5 x 79 x 22 mm

PUSH function is not compatible to switchDIM.

1 ... 10 VDC source with double or reinforced insulation with respect to AC mains.

Max. source current: 0.35 mA

No-load operation.

Max. permitted inrush current: 50 mA.

On overload and over temperature the output power will be reduced.

Uconverter LCAI 50 W 1050 mA N020 DALI

ECO series

111

124,5

Ø4,5

Ordering data

Type Article number

Packaging

carton

Packaging

pallet

Weight per pc.

LCAI 0050/1050 N020 DALI 24166469 50 pc(s). 2,000 pc(s). 0.21 kg

PHASED OUT

Summary of content (5 pages)

PAGE 1
LED control gear Compact dimming Uconverter LCAI 50 W 1050 mA N020 DALI ECO series Product description T • 1-channel LED control gear • Independent LED control gear for indoor use • Output current and output voltage adjustable U • FAN output 12 V • NTC input channel • Nominal life of 50,000 h (at ta max. with a failure rate of 5 %) • Dimmable via DALI, 1 ...
PAGE 2
LED control gear Compact dimming Specific technical data Type Output Typ. power Output voltage range Max. output current Operating temperature ta 350 mA ±6 % 25 W 2 – 74 V – -25 ... 50 °C 500 mA ±5 % 35 W 2 – 72 V – -25 ... 50 °C 700 mA ±5 % 50 W 2 – 71 V – -25 ... 50 °C 900 mA ±5 % 50 W 2 – 55 V – -25 ... 45 °C 1,050 mA (default) ±5 % 50 W 2 – 48 V – -25 ... 45 °C 48 V ±5 % 50 W – 1,050 mA -25 ...
PAGE 3
LED control gear Compact dimming Standards EN 55015 EN 61000-3-2 EN 61347-1 EN 61347-2-13 EN 61547 EN 62384 IEC 62386-101 IEC 62386-102 DIN VDE 0710 part 14 Dip SWITCH position Output Position 350 mA 6 5 4 3 2 1 – – – – – – 500 mA on – – – – – 700 mA on on – – – – 900 mA on on on – – – 1,050 mA (default) on on on on – – 48 V on on on on – on T Before use, always check Dip SWITCH setting. Glow wire test according to EN 60695-2-11 960 °C passed.
PAGE 4
LED control gear Compact dimming Wiring type and cross section Strain relief for Ø 3 – 8 mm. Maximum loading of automatic circuit breakers Installation Ø LCAI 050/1050 N020 DALI C10 C16 B10 B16 1.5 mm2 1.5 mm2 1.5 mm2 1.5 mm2 15 25 9 15 Input / Output terminal Please use only one wire per terminal. Wiring guidelines • The cables should be run separately from the mains connections and mains cables to ensure good EMC conditions. • The maximum secondary cable length at the terminals is 5 m.
PAGE 5
LED control gear Compact dimming Wiring diagram 1...10 V or potentiometer Wiring diagram PUSH function 6 5 4 3 2 1 6 5 4 3 2 1 Uconverter LCAI 50 W 1050 mA N020 DALI NTC FAN 12 V – + PUSH U N L Max. 10 devices in series (1 master + 9 slaves) 6 5 4 3 2 1 – SEC + – 1...10 V + O 6 5 4 3 2 1 – SEC + – 1...