Whitepaper

DALI A/S [phone]
www.dali-speakers.com
15
A C C E S S O R I E S
All floorstanding IKON speakers come with spikes
made of black chrome steel. These are mounted in
the aluminum cast ‘feet’.
For use on ‘sensitive’ floors, we have also included
vibration absorbing feet which will leave soft
surfaces - such as a wooden floor - untouched.
Tools for mounting the aluminum feet and spikes
are included.
Accessories for IKON 5, 6 and 7 MK2.
I K O N S U B M K 2
Built like the rest of the IKON MK2 series, the cabinet
of the IKON SUB MK2 sports a solid two-layer front
baffle to create the best working environment for
the front-firing woofer. The cabinet itself is elevated
from a base beneath, the dividing space creating
an extension of the down-firing, flared bass reflex
port. The result is an impressive, seamless acoustic
coupling to the room.
When reproducing low frequencies it is important
to maintain a piston-like behaviour from the driver,
also at high sound pressure level. For this purpose
the long-throw 12” woofer relies on a rigid paper
cone and dust cap attached to a 4-layer 26.5 mm
long voice coil.
The dust cap not only lives up to its name, it plays
an important role in reinforcing the entire cone.
The pole piece features ample ventilation to reduce
compression, and to ensure adequate cooling.
The woofer is powered by a 325 Watt analog and
extremely linear amplifier. The rear panel feature
controls for gain, phase, and upper crossover
frequency, and the subwoofer will accept a full
frequency LINE IN as well as a dedicated LFE signal.