Operation Manual

Wall-mounting the IKON 1 & IKON On Wall

DALI IKON 1

There are several placement options for DALI

IKON 1: on a stand, on a shelf, on a table-top or

wall-mounting.

For the best possible sound, we recommend pla-

cement with the tweeter module at roughly the

same height as your ears when you are seated in

your favourite listening position.

For wall-mounting of DALI IKON 1, use the built-

in bracket on the speaker’s rear panel. Mount the

included rubber feet on the rear of the speaker

to avoid scufﬁ ng the wall and to ensure secure

mounting. Hang the loudspeaker on a screw that

sits ﬁ rmly in the wall. You must make certain that

the screw can bear the weight of the speaker as

stated in the technical speciﬁ cations. The diame-

ter of the screw head should be 8 - 10 mm and

the diameter of the screw should be max. 4 mm.

DALI IKON O

N WALL

DALI IKON ON WALL is designed for wall-mounting.

Because the loudspeaker can be positioned four

different ways, there are four brackets on the rear

panel. The speaker can be used as front, rear,

side or center loudspeaker. If used as center loud-

speaker, it can be placed above or below the TV-

screen. For wall-mounting, follow the instructions

above for DALI IKON 1.

On the rear panel of DALI IKON O

N WALL, there

are four indentations to make room for loudspea-

ker cable between the speaker and the wall. This

allows you to run cable along either side up or

down depending on what works best for you.

Figure 11. Wall-mounting IKON 1

Figure 12. Wall-mounting IKON O

N WALL