User Manual
Table Of Contents
- Bookmark 27
- Bookmark 28
- 1.0 Unpacking
- 2.0 Buttons, indication LED’s and Connections
- 2.4 Bluetooth button functions
- 2.3 Remote control
- 3.0 Power and Auto Source Select
- 3.4 Auto Source Select
- 4.0 Volume
- 5.0 Bluetooth
- 5.3 Bluetooth Naming
- 5.2 Bluetooth Release
- 6.0 Sound Mode
- 7.0 Connections
- 7.6 HDMI In
- 8.0 Positioning
- 9.0 Factory Reset & Firmware Upgrade
- 10.0 Cleaning
- 11.0 Disposal
5.0 BLUETOOTH
5.2 BLUETOOTH RELEASE
If you are unable to pair your device to the DALI KATCH ONE;
1. Press and hold the Bluetooth release button (Button
2
)
until the Bluetooth release sound plays and the Bluetooth
LED (LED
1
) starts blinking
2. The connected devices are now released and you can
re-engage the pairing (See 5.1)
5.3 BLUETOOTH NAMING
If you have more than one DALI KATCH ONE, it is possible to change the
Bluetooth name of your DALI KATCH ONE.
1. Turn on the DALI KATCH ONE (See 3.1)
2. Press and hold the Power ON/OFF button (Button
3
)
3. Then press either Volume Up (Button
5
) or Volume Down (Button
4
) to
circle through the possible names (DALI KATCH ONE, DALI KATCH ONE 1,
DALI KATCH ONE 2 and DALI KATCH ONE 3)
DALI KATCH ONE DALI KATCH ONE 1 DALI KATCH ONE 2 DALI KATCH ONE 3
11